Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 11
Functional Execution Command Table, Image Command Table, PC Adjust Control Command Table, Input
View all Canon LV-7575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
LV-7575 Expand Serial Command Functional Specifications 5 Functional Execution Command Table 5.1 Image Command Table Execute command CF_BRIGHT_%1 [CR] CF_CONT_%1 [CR] CF_COLOR_%1 [CR] CF_TINT_%1 [CR] CF_SHARP_%1 [CR] CF_GAMMA_%1 [CR] CF_WBAL-R_%1 [CR] CF_WBAL-G_%1 [CR] CF_WBAL-B_%1 [CR] CF_COLTEMP_%1 [CR] CF_NZRED_%1 [CR] CF_PROGV_%1 [CR] CF_IMAGE_%1 [CR] CF_IMAGEADJ_%1 [CR] CF_APCTRL_%1 [CR] CF_COLMNSAV_%1 [CR] CF_COLMNLD_%1 [CR] Item Set value of Brightness Set value of Contrast Set value of Color Set value of Tint Set value of Sharpness Set value of Gamma Set Red value of White Balance Set Green value of White Balance Set Blue value of White Balance Set level of Color Temprature Set ON/OFF of Noise reduction Set mode of Progressive scan Set Image mode Set Store/Reset of values in Image Adjustment Set level of Auto Picture Control Set area to store current values of Color Management Set area to load values of Color Management 5.2 PC Adjust Control Command Table Execute command CF_FSYNC_%1 [CR] CF_TDOTS_%1 [CR] CF_CLPPHASE_%1 [CR] CF_CLPWIDTH_%1 [CR] CF_H-POS_%1 [CR] CF_V-POS_%1 [CR] CF_DDOTS_%1 [CR] CF_DLINE_%1 [CR] CF_SETPCADJ_%1 [CR] CF_ORGMODE_%1 [CR] CF_PCSTORE_%1 [CR] CF_PCMODEFREE_%1 [CR] Item Set value of Fine Sync Set value of Total Dots Set value of Clamp Phase Set value of Clamp Width Set value of Horizontal Position Set value of Vertical Position Set value of Display Dots Set value of Display Line Apply values set in PC Adjust menu to screen image Specify the original signal for PC mode Store current setting values in PC Adjust menu to Mode %1 Delete the values registered in Mode %1 and return it to Free status. 5.3 Input Control Command Table Execute command CF_INPUT_%1 [CR] CF_SOURCE_%1 [CR] CF_INPUT1_%1 [CR] CF_INPUT2_%1 [CR] CF_INPUT3_%1 [CR] CF_INPUT4_%1 [CR] CF_SYSTEM_%1 [CR] Item Select Input Select Source of selected Input Select Input1 and also set input source to %1 Select Input2 and also set input source to %1 Select Input3 and also set input source to %1 Select Input4 and also set input source to %1 Select System of curretnlty selected Input 11/71