Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 42
CR_IMGGMD Command, CR_APCTRL Command, PC Adjust Status Read Command, CR_FSYNC Command, CR_TDOTS
View all Canon LV-7575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
LV-7575 Expand Serial Command Functional Specifications 9.4.14 CR_IMGGMD Command Command "CR_IMGGMD" [CR] Details Get setting status of Standard/Real/Cinema in Image Gamma Acceptable "000_%1" [CR] "STDPC Standard (PC) Response %1 "STDAV Standard (AV) "REL High contrast "CNM Cinema Unacceptable "?" [CR] 9.4.15 CR_APCTRL Command Command "CR_APCTRL" [CR] Details Get setting status of Auto Picture Control Acceptable "000_%1" [CR] "L1 Operate Auto Picture Control with Level1 Response %1 "L2 Operate Auto Picture Control with Level2 "OFF Set Auto Picture Control OFF Unacceptable "?" [CR] 9.5 PC Adjust Status Read Command 9.5.1 CR_FSYNC Command Command "CR_FSYNC" [CR] Details Get value of Fine Sync Acceptable "000_%1" [CR] Response %1 Unacceptable "0000 - 0031" "Error Code" [CR] --- When command is not available in the given condition (such as being selected input) "?" [CR] --- When unknown command is received 9.5.2 CR_TDOTS Command Command "CR_TDOTS" [CR] Details Get value of Total Dots Acceptable "000_%1" [CR] %1 Response "mmmm" - "nnnn" (mmmm = Display area H + Position H) (nnnn = Maximum value less than 140 MHz of Dot Clock) "Error Code" [CR When command is not Unacceptable available in the given condition (such as being selected input "?" [CR When unknown command is received 9.5.3 CR_CLPPHASE Command Command "CR_CLPPHASE" [CR] Details Get value of Clamp Phase value Acceptable "000_%1" [CR] Response %1 "0001 - 0255" Unacceptable "Error Code" [CR] 42/71