Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 19
CF_SHARP Command, CF_GAMMA Command, CF_WBAL- Command
View all Canon LV-7575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
LV-7575 Expand Serial Command Functional Specifications 8.4.5 CF_SHARP Command Command "CF_SHARP_%1" [CR] "000-031 Directly specify setting value of Sharpness %1 "UP Increment setting value of Sharpness by 1 "DN Decrement setting value of Sharpness by 1 Details Response Set user controlled value of Sharpness (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.6 CF_GAMMA Command Command "CF_GAMMA_%1" [CR] "000-015 Directly specify setting value of Gamma %1 "UP Increment setting value of Gamma by 1 "DN Decrenment setting value of Gamma by 1 Details Set user controlled value of Gamma (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFFstatus, the value returns to the original setting. (It is stored in Standby mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.7 CF_WBAL- Command Command "CF_WBAL-%1_%2" [CR] "R" --------- RED %1 "G" --------- GREEN "B" --------- BLUE "000-063"------ Directly specify value of Color selected in %1 of White Balance. "UP Increment setting value of Color specified in %1 of White Balance %2 by 1 "DN Decrement setting value of Color specified in %1 of White Balance by 1 Details Set value of Color specified in %1 of White Balance (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Acceptable Response "000" [CR] Unacceptable "Error Code"[CR] 19/71