Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 57

LV-7575 Expand Serial Command Functional Specifications 9.11.15 CR_SECURITY Command Command "CR_ SECURITY" [CR] Details Get ON/OFF setting status of Security on menu. Acceptable "000_%1" [CR] Response %1 "ON PJ/USB are locked "OFF PJ/USB are not locked. Unacceptable "Error Code" [CR] 9.11.16 CR_PJLOCKNOW Command Command "CR_PJLOCKNOW" [CR] Details Get actual setting status of PIN code lock Acceptable "000_%1" [CR] Response "LOCK" ------ PJ is locked PIN code lock is set to ON1/ON2 on the menu and PJ PIN code is not entered, therefore PJ is actually locked. %1 "FREE" ------- PJ is unlocked (either A or B) A) PJ lock is set to OFF on the menu B) PJ lock is set to ON1/ON2 on the menu, but PIN code Lock mode is canceled because PJ PIN code is entered. Unacceptable "Error Code" [CR] 9.11.17 CR_PJLOCKMENU Command Command "CR_PJLOCKMENU" [CR] Details Get ON/OFF setting status of PIN code lock on menu Acceptable "000_%1" [CR] Response "ON1 PIN code lock ON 1 is set on the menu %1 "ON2 PIN code lock ON 2 is set on the menu "OFF PIN code lock OFF is set on the menu Unacceptable "Error Code" [CR] 9.12 Other Status Read Commands 9.12.1 CR_STATUS Command COMMAND "CR_STATUS" [CR] Detail Get operating status of Projector Same as "CR0" in basic command except error code follows it. Response Acceptable "000_%1" [CR] "00" = Power ON "80" = Standby "40" = Countdown in process "20" = Cooling Down in process "10" = Power Failure "28" = Cooling Down in process due to abnormal temperature %1 "88" =Standby after Cooling Down due to abnormal temperature "02" = Invalid RS-232C Command "24" = Power Save/Cooling Down in process "04" = Power Save "21" = Cooling Down in process after turened Off due to lamp failure "81" Standby after Cooling Down due to lamp failure 57/71