Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 9
Overview, Serial Interface Specification, Transfer Specification, Connection
View all Canon LV-7575 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
LV-7575 Expand Serial Command Functional Specifications 1 Overview This Functional Specification defines communication with LV-NI02 for LV-7575. Supporting Farmware Ver. 1.x of the projector. Commands in this document are to communicate with LV-NI02, but most commands are used to control a projector remotely from a computer with RS-232C. Therefore commands in this document are defined as Expand Serial Commands. 2 Serial Interface Specification 2.1 Transfer Specification Item Specification Synchronous System Asynchronous Transmission Speed Data Length Parity Stop Bit Flow Control 9600 / 19200 8 bits N/A 1 N/A Note1) Transmission Speed: initial setting value is 19200 Note2) Transmission Speed can be changed in Service mode. 2.2 Connection Dedicated serial cables that come with the projector must be used for the connection between a computer and a projector. PC Projector COM 1 Control Port (D-Sub 9Pin) (mini 8Pin) 9/71