Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 32

LV-7575 Expand Serial Command Functional Specifications 8.8.2 CF_LAMPMODE Command Command "CF_LAMPMODE_%1" [CR] "NORMAL Set Lamp status to Normal mode %1 "ECO Set Lamp status to Silent mode "AUTO Set Lamp status to Auto mode Details Select Lamp mode (Available only in the normal Power ON status) The value set by this command is stored in EEPROM and the setting remains effective after the power is turned to ALL OFF status. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9 Sound Command 8.9.1 CF_VOLUME Command Command "CF_VOLUME_%1" [CR] "000-063 Directly specify value of Volume. %1 "UP Increment setting value of Volume by 1 "DN Decrement setting value of Volume by 1 Details Control level of Volume (Available only in the normal Power ON status) Set Volume Up/Down the same way as RC and also directly specify value of Volume. When setting Volume value, the Sound Mute ON status is canceled just like RC operation. The value set by this command is stored in Projector's memory. Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.2 CF_MUTE Command Command "CF_MUTE_%1" [CR] %1 "ON Set Sound Mute to ON "OFF Set Sound Mute to OFF Details Control ON/OFF of Sound Mute (Available only in the normal Power ON status) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.9.3 CF_BLTINSP Command Command "CF_BLTINSP_%1" [CR] %1 "ON Set Built-in speaker to ON "OFF Set Built-in speaker to OFF Details Set ON/OFF of Built-in speaker (Available only in the normal Power ON status). Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 32/71