Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 20

LV-7575 Expand Serial Command Functional Specifications 8.4.8 CF_COLTEMP Command Command "CF_COLTEMP_%1" [CR] %1 Details Response "000 Xlow "001 Low "002 Mid "003 High Set Color Temperature (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Acceptable "000" [CR] Unacceptable "Error Code" [CR] 8.4.9 CF_NZRED Command Command "CF_NZRED_%1" [CR] "OFF Cancel Noise Reduction "L1 Set Noise Reduction to L1 %1 "L2 Set Noise Reduction to L2 "UP Switch setting forward direction (OFF→L1→L2→OFF) "DN Switch setting backward direction (OFF→L2→L1→OFF) Details Set Noise Reduction level (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It returns to the original setting in Standby mode as well.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 8.4.10 CF_PROGV Command Command "CF_PROGV_%1" [CR] "ON Set Progressive scan to On. "FILM Set Progressive scan to Film. %1 "OFF Set Progressive scan to OFF. "UP Switch setting forward direction (OFF→ON→FILM→OFF) "DN Switch setting backward direction (OFF→FILM→ON→OFF) Details Set Progressive scan mode. (Available only in the normal Power ON status) The value set by this command will not be stored in the projector's memory. Therefore, when the power is turned to ALL OFF status, the value returns to the original setting. (It is stored in Standby mode.) Acceptable Response "000" [CR] Unacceptable "Error Code" [CR] 20/71