Canon LV-7575 LV-7575 EXPAND SERIAL COMMAND FUNCTIONAL SPECIFICATIONS - Page 13

LV-7575 Expand Serial Command Functional Specifications 6 Status Read Command Table 6.1 Image Status Read Command Table Status Read command CR_BRIGHT [CR] CR_CONT [CR] CR_COLOR [CR] CR_TINT [CR] CR_SHARP [CR] CR_GAMMA [CR] CR_WBAL-R [CR] CR_WBAL-G [CR] CR_WBAL-B [CR] CR_COLTEMP [CR] CR_NZRED [CR] CR_PROGV [CR] CR_IMAGE [CR] CR_IMGGMD [CR] CR_APCTRL [CR] Item Get value of Brightness Get value of Contrast Get value of Color Get value of Tint Get value of Sharpness Get value of Gamma Get Red value of White Balance Get Green value of White Balance Get Blue value of White Balance Get value of Color temperature Get setting status of Noise reduction Get setting status of Progressive scan Get Selected Image status Get setting value of Image Gamma Get setting status of Auto Picture Control 6.2 PC Adjust Status Read Command Table Status Read command CR_FSYNC [CR] CR_TDOTS [CR] CR_CLPPHASE [CR] CR_CLPWIDTH [CR] CR_H-POS [CR] CR_V-POS [CR] CR_DDOTS [CR] CR_DLINE [CR] CR_ORGMODE [CR] CR_PCSTORE [CR] CR_SETPCADJ [CR] Item Get setting value of Fine Sync Get setting value of Total Dots Get setting value of Clamp phase Get setting value of Clamp width Get setting value of Horizontal Position Get setting value of Vertical Position Get setting value of Display Dots Get setting value of Display Line Get the original signal for PC-Adjusted mode Get status Free/ Stored for PC Adj. mode 1-10 Get currently displayed PC signal in system 6.3 Video Status Read Command Table Status Read command CR_SERSYS [CR] Item Get currently selected signal. In Auto mode, it returns a result by Auto detection. 13/71