Canon MP730 MultiPASS MP730 User's Guide - Page 46
Reading data from or writing data to a memory card, Enabling/disabling overwriting memory card data - windows 8
UPC - 013803031683
View all Canon MP730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4 Press [Set]. PRINT PHOTO DATE OFF 5 Use [2] or [3] to select to enable date printing or to disable it. 6 Press [Set]. • When date printing is enabled, the LCD will display < >. Reading data from or writing data to a memory card When your machine is connected to a computer, the memory card drive (Removable Disk) will appear on your computer's [My Computer]. By inserting a memory card in the machine, you can view photographs on the memory card by opening the [Removable Disk] on your computer. You can then copy the photographs to your 4 computer's hard disk (similar to copying other files on the hard disk), or by changing the setting, can copy hard disk files onto the memory card. Photo printing from a memory card IMPORTANT • Do not put your computer in standby or sleep mode when a memory card is inserted in a card slot. Also, do not remove or switch memory cards when your computer is in standby or sleep mode. • Insert only one memory card at a time into the machine. • When switching between memory cards of the same type or inserting a memory card into a different card slot, press [ON/OFF (1 sec.)] to turn off the power before removing the card. Once removed, press [ON/OFF (1 sec.)] again to turn on the power before inserting the other memory card. • In Windows 2000, if you turn off the machine, the [Unsafe Removal of Device] screen will be displayed. In this case, click [OK]. This will not affect your machine or computer's operation. • If you insert memory cards into both slots, the compact flash card will be recognized. Enabling/disabling overwriting memory card data You can enable or disable overwriting memory card data. This setting is initially set to disable overwriting. Follow this procedure to change the setting: 1 Make sure there is no memory card inserted in the machine. 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set]. USER DATA 1.TEL REGISTRATION 5 Use [2] or [3] to select . 6 Press [Set]. 7 Use [2] or [3] to select . Chapter 4 Photo printing from a memory card 4-15