Canon MP730 MultiPASS MP730 User's Guide - Page 85

Receiving with a DRPD (Distinctive Ring Pattern Detection) service: DRPD Choose this mode if: • you only have one telephone line for both fax and telephone use. • you want to receive faxes automatically as well as voice calls. • you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your telephone company. This service assigns two or more telephone numbers with distinctive ring patterns to a single telephone line, allowing you to have both a fax number(s) and a telephone number(s) using only one telephone line. Your machine will automatically monitor incoming calls and based on the ring pattern, will let you know if the call is a fax or voice call. Contact your telephone company for more information on this service. You will need to: • set ( p. 9-1). • connect a telephone to your machine ( Set-up Sheet). When you receive a fax call: The machine will ring according to the ring pattern you have chosen and receive the fax automatically. When you receive a voice call: The machine will ring according to the ring pattern you have chosen. Pick up the handset to answer the call. Setting the ring pattern Your telephone company will assign a distinctive ring pattern to each number when you order the DRPD service. Follow this procedure to set the fax ring pattern that matches the pattern assigned by the telephone company: 1 Make sure you have set ( p. 9-1). 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set]. USER DATA 1.TEL REGISTRATION 5 Use [2] or [3] to select . 6 Press [Set]. FAX SETTINGS 1.USER SETTINGS 7 Use [2] or [3] to select . 8 Press [Set]. RX SETTINGS 1.ECM RX 9 Use [2] or [3] to select . 9-4 Receiving faxes Chapter 9