Canon MP730 MultiPASS MP730 User's Guide - Page 47
Press [Stop/Reset] to return to standby mode., Insert a memory card into the appropriate slot.
UPC - 013803031683
View all Canon MP730 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
8 Press [Set]. CARD PROTECT ON 9 Use [2] or [3] to select to disable overwriting or to enable overwriting. 10 Press [Set]. 11 Press [Stop/Reset] to return to standby mode. 12 Press [Copy], [Fax], or [Scan] to select a mode other than photo print mode. • To avoid damage to data being accessed on a memory card, you cannot overwrite data in photo print mode. 13 Insert a memory card into the appropriate slot. IMPORTANT • If you change the above setting while a memory card is inserted in a card slot, turn the machine off then on again. The new setting will not be activated until you do so. 4-16 Photo printing from a memory card Chapter 4
4-16
Photo printing from a memory card
Chapter 4
8
Press [Set].
9
Use [
2
] or [
3
] to select <ON> to disable overwriting or <OFF> to enable overwriting.
10
Press [Set].
11
Press [Stop/Reset] to return to standby mode.
12
Press [Copy], [Fax], or [Scan] to select a mode other than photo print mode.
•
To avoid damage to data being accessed on a memory card, you cannot overwrite data in photo
print mode.
13
Insert a memory card into the appropriate slot.
IMPORTANT
•
If you change the above setting while a memory card is inserted in a card slot, turn the machine off
then on again. The new setting will not be activated until you do so.
CARD PROTECT
ON