Canon MP730 MultiPASS MP730 User's Guide - Page 96

Printing the nozzle check pattern, Cleaning the printhead - printhead alignment

Page 96 highlights

Printing the nozzle check pattern The nozzle check pattern shows if each printhead nozzle is operating properly. NOTE • You can also print the nozzle check pattern from your computer ( Software Guide). Follow this procedure to print the nozzle check pattern from the machine: 1 Load letter-size plain paper in the multi-purpose tray. 2 Press [Menu]. 3 Use [2] or [3] to select . 4 Press [Set] twice. Nozzle check pattern If the pattern is broken, missing, or a specific color is not printed, see Cleaning the printhead, below. Printhead position If the pattern is not uniform, align the printhead ( p. 11-5). If lateral lines are visible, align the printhead ( p. 11-5). Cleaning the printhead If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the printhead. NOTE • Cleaning the printhead consumes a small amount of ink. Cleaning too often reduces the amount of ink in the ink tanks. • You can also clean the printhead from your computer ( Software Guide). Follow this procedure to clean the printhead from the machine: 1 Press [Menu]. 2 Use [2] or [3] to select . 3 Press [Set]. MAINTENANCE 1.NOZZLE CHECK 4 Use [2] or [3] to select the cleaning setting you want. • Select: - for normal printhead cleaning. - for deep printhead cleaning. • For details on which to select, see p. 11-3. 5 Press [Set]. 11-4 Maintenance Chapter 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142

11-4
Maintenance
Chapter 11
Printing the nozzle check pattern
The nozzle check pattern shows if each printhead nozzle is operating properly.
NOTE
You can also print the nozzle check pattern from your computer (
²
Software Guide
).
Follow this procedure to print the nozzle check pattern from the machine:
1
Load letter-size plain paper in the multi-purpose tray.
2
Press [Menu].
3
Use [
2
] or [
3
] to select <MAINTENANCE>.
4
Press [Set] twice.
Cleaning the printhead
If the printed nozzle check pattern is broken, missing, or a specific color is not printed, clean the
printhead.
NOTE
Cleaning the printhead consumes a small amount of ink. Cleaning too often reduces the amount of ink
in the ink tanks.
You can also clean the printhead from your computer (
²
Software Guide
).
Follow this procedure to clean the printhead from the machine:
1
Press [Menu].
2
Use [
2
] or [
3
] to select <MAINTENANCE>.
3
Press [Set].
4
Use [
2
] or [
3
] to select the cleaning setting you want.
• Select:
– <HEAD CLEANING> for normal printhead cleaning.
– <HEAD REFRESHING> for deep printhead cleaning.
For details on which to select, see p. 11-3.
5
Press [Set].
Nozzle check pattern
If the pattern is broken, missing, or a specific color is not
printed, see
Cleaning the printhead
, below.
Printhead position
If the pattern is not uniform, align the printhead (
²
p. 11-5).
If lateral lines are visible, align the printhead (
²
p. 11-5).
MAINTENANCE
1.NOZZLE CHECK