Canon PIXMA iP4300 Quick Start Guide - Page 37
Install the ink tank., Close the Inner Cover., Close the Top Cover. - no power
View all Canon PIXMA iP4300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
5 Install the ink tank. (1) Insert the front end of the ink tank into the Print Head. *1 (2) Press on the mark on the ink tank until the ink tank snaps firmly into place. (3) Make sure that the ink lamp lights up red. Important (1) The printer cannot be used unless all the ink tanks are installed. (2) (3) 6 Close the Inner Cover. Note Make sure that the Inner Cover is closed. Printing will not start with the Inner Cover open since paper can not be fed properly. *1 Make sure the position of the tank matches the label. 7 Close the Top Cover. Note z If the ALARM lamp still flashes orange after the Top Cover is closed, see "ALARM Lamp Flashes Orange" on page 76. z When you start printing after replacing the ink tank, Print Head Cleaning is performed automatically. Do not perform any other operations until Print Head Cleaning finishes. The POWER lamp flashes green during cleaning. Routine Maintenance 33