Canon imagePROGRAF iPF770 User Guide - Page 153

Windows Software Printer Driver iPF770 View Settings Dialog Box for the Printing Application D Roll Paper Margin for Safety You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held firmly against the Platen. • E Near End Margin Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed. Setting Item Details Printer Default The setting of the control panel of the printer is applied. 3 mm (0.12 in) The document is printed in the standard size. * Select this when you do not have any problems in printing. 20 mm (0.8 in) Select this when rubbing against the printhead occurs such as when using paper that tends to curl. F Cut Speed Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic cutting is used. Setting Item Printer Default Details The setting of the control panel of the printer is applied. High Speed When the Standard setting does not result in cutting the surface cleanly, select this. Standard Select this when you do not have any problems in automatic cutting. Low Speed This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you select it when using adhesive paper. G Mirror Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with the left and right sides inverted. View Settings Dialog Box for the Printing Application In the View Settings dialog box, you can check details of the selected printing application. • To display the View Settings dialog box, on the Main sheet, click View Settings by Print Target. (See "Main Note Sheet .") ➔P.148 153 • A Print Target Shows all Print Target options (settings items for the printing application). • B Name Identifies the item selected in Print Target by its name and an icon. User's Guide