Canon imagePROGRAF iPF770 User Guide - Page 16

Basic Printing Workflow Printing procedure Loading and Printing on Rolls iPF770 • The Power Lamp and Message Lamp are not lit (even once), and nothing appears on the Display Screen Make sure the printer is plugged in correctly. Check the connection at the plug and electrical outlet. • No paper is loaded Load paper. (See "Loading and Printing on Rolls.") ➔P.16 Sheets.") ➔P.18 (See "Loading and Printing on Turning the printer off • Never disconnect the printer's power supply or unplug it during a print job. This may damage the printer. Important 1 Make sure no print jobs are in progress. If the Message Lamp is flashing, check the message on the Display Screen and take action as necessary. (See "Error Messages.") ➔P.554 If the Data Lamp is flashing, the printer is receiving a print job. Turn off the printer only after printing is finished. 2 Hold down the Power button for more than a second. After "Shut Down.. Please Wait.." is shown on the Display Screen, the printer shuts off. Loading and Printing on Rolls 16 These are the basic steps for loading and printing on rolls. Follow these steps to load and print on rolls. • For details on supported sizes and types of rolls, see Paper Sizes or the Paper Reference Guide. (See "Paper Note Sizes.") ➔P.310 (See "Types of Paper.") ➔P.310 • If you prefer to wait for the ink to dry after printing and simply eject the document, you can deactivate automatic cutting and cut the paper manually. (See "Specifying the Cutting Method for Rolls.") ➔P.333 User's Guide