Canon imagePROGRAF iPF770 User Guide - Page 537

iPF770 An error message is shown on the Display Screen The printer stops during a print job An error message is shown on the Display Screen 537 The printer ejects blank, unprinted paper ...537 The printer stops when printing a HP-GL/2 job (the carriage stops moving 549 An error message is shown on the Display Screen Cause The last portion of roll paper was used during a print job, and paper could not be advanced because the trailing edge is taped to the roll. Corrective Action Remove the used roll and insert a new roll. (See "Removing the Roll from the Printer.") ➔P.327 (See "Removing the Roll Holder from Rolls.") ➔P.329 (See "Loading and Printing on Rolls.") ➔P.16 The printer ejects blank, unprinted paper Cause The leading edge of the roll paper was cut to straighten it. The Printhead nozzles are clogged. A print job was received from an incompatible printer driver. The printer has received print data that includes HP RTL commands when Auto Rotate is On in the Control Panel menu. The printer is damaged. Corrective Action The leading edge of rolls may be cut to straighten it if Trim Edge First is set to a value other than Off in the Control Panel menu. (See "Cutting the Leading Edge of Roll Paper Automatically.") ➔P.337 Print a test pattern to check the nozzles and make sure the Printhead is in good condition for printing. (See "Checking for Nozzle Clogging.") ➔P.502 Use the correct imagePROGRAF printer driver for the printer and try printing again. In the Control Panel, set Auto Rotate to Off and print again. (See "Menu Settings.") ➔P.416 Contact your Canon dealer for assistance. Troubleshooting The printer stops during a print job 537 User's Guide