Canon imagePROGRAF iPF770 User Guide - Page 320

Handling and Use of Paper Attaching the Roll Holder to Rolls iPF770 Handling rolls Attaching the Roll Holder to Rolls ...320 Loading Rolls in the Printer ...322 Changing the Type of Paper ...325 Specifying the Paper Length ...326 Removing the Roll from the Printer ...327 Removing the Roll Holder from Rolls ...329 ➔ Clearing Jammed Roll Paper ...527 ➔ Clearing Jammed Paper (Paper Feed Slot 532 Feeding Roll Paper Manually ...330 Keeping Track of the Amount of Roll Paper Left 331 Specifying the Ink Drying Time for Rolls ...331 Specifying the Cutting Method for Rolls ...333 Cutting the Leading Edge of Roll Paper Automatically 337 Reducing Dust from Cutting Rolls ...338 Roll Holder Set ...439 Attaching the Roll Holder to Rolls When printing on rolls, attach the Roll Holder to the roll. Rolls have a two- or three-inch paper core. Use the correct attachment for the paper core. The printer comes equipped with the 2-Inch Paper Core Attachment installed. Using Rolls with a 2-Inch Paper Core Using Rolls with a 3-Inch Paper Core Holder Stopper (Left Side) Roll Holder (Right Side) Holder Stopper (Left Side) Roll Holder (Right Side) 2-Inch Paper Core Attachment No Attachment Needed 3-Inch Paper Core Attachment L 3-Inch Paper Core Attachment R Handling rolls • Set the roll on a table or other flat surface so that it does not roll or fall. Rolls are heavy, and dropping a roll may Caution cause injury. • When handling the roll, be careful not to soil the printing surface. This may affect the printing quality. We recom- Important mend wearing clean cloth gloves when handling rolls to protect the printing surface. • Use scissors or a cutting tool to cut the edge of the roll paper if it is uneven, dirty, or has tape residue. Otherwise, it may cause feeding problems and affect the printing quality. Be careful not to cut through any barcodes printed on the roll. 320 • Align the edges of the paper on both ends of the roll. Misalignment may cause feeding problems. User's Guide