Canon imagePROGRAF iPF770 User Guide - Page 422
DNS Dync update, Default G/W
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 422 highlights
Menu Settings GL2 Settings Line & Pen Manager Setting Item Smoothing Description, Instructions • If you choose Smooth iPF770 ThickenFineLines Select On to print fine lines more distinctly. AdjustFaintLines If fine lines are printed in colors that do not match the colors of other shapes, selecting Off may help produce the expected results. However, lines in some colors may appear broken. Control Panel ProcessingOption Warning PageSizeProcess1 Select On to have any GL2-related warnings displayed. Set the position of the margin relative to the image range. Choose Off to set the margin outside the image range. Although the image will not be missing, you should print on paper larger than the size of the image range plus the margins. Choose On to set the margin inside the image range. The image may be missing depending on the layout. Printer Menu PageSizeProcess2 Change the method of handling image range information. Normally, leave the setting Off. Try On if the image is missing or you get a blank paper. GL2 Set Print Print GL2 settings information. Interface Setup EOP Timer TCP/IP IPv4 IPv4 Mode Specify the timeout period before cancellation of print jobs that cannot be received by the printer. Choose whether the printer IP address is configured automatically or a static IP address is entered manually. Protocol DHCP BOOTP Specify the protocol used to configure the IP address automatically. RARP IPv4 Settings IP Address Subnet Mask Default G/W Specify the printer network information when using a static IP address. Enter the IP address assigned to the printer, as well as the network subnet mask and default gateway. The value that was automatically configured is displayed if you have set IPv4 Mode to Automatic. DNS DNS Dync update Settings Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. Sec. DNS SrvAddr DNS Host Name Specify the DNS host name. DNS Domain Name Specify the DNS domain name. IPv6 IPv6 Support Specify whether to connect via IPv6. IPv6 StlessAddrs Specify whether a IPv6 stateless address is used. 422 DHCPv6 Specify whether DHCPv6 settings are used. DNS DNS Settings Dync update Statefull Addr Stateless Addr Specify whether DNS server registration is updated automatically. Pri. DNS SrvAddr Specify the DNS server address. User's Guide