Canon imagePROGRAF iPF770 User Guide - Page 423
DNS Domain Name, Shut Down Timer
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 423 highlights
iPF770 Menu Settings Interface Setup TCP/IP Setting Item IPv6 DNS Settings Sec. DNS SrvAddr DNS Host Name DNS Domain Name Description, Instructions Specify the DNS server address. Specify the DNS host name. Specify the DNS domain name. Ethernet Driver Auto Detect Specify the communication method. To apply your changes, choose Register Setting. Choose On for automatic configuration of the LAN communication protocol. Choose Off to use settings values of Comm.Mode and Ethernet Type. Comm.Mode Choose the LAN communication method. Ethernet Type Choose the LAN transfer rate. Spanning Tree Choose whether spanning-tree packets are supported over the LAN. Control Panel MAC Address Indicates the MAC address. Interface Print Print interface settings information. Return Defaults Choose OK to restore Interface Setup settings to the default values. Printer Menu System Sleep Timer Setup Shut Down Timer Specify the period before the printer enters sleep mode. Sets the time until the printer turns off automatically. If no operations are performed on the printer for the duration of the time set in Shut Down Timer after entering Sleep mode, the printer automatically turns off. Buzzer Choose On for the buzzer to sound once for warnings and three times for errors. Contrast Adj. Adjust the Display Screen contrast level. Date & Time Date Time Set the current date. Set the current time. Available only if the Date setting is specified. Date Format Specify the date format. Language Specify the language used on the Display Screen. Time Zone Specify the time zone. Time zone options indicate a main city in this time zone and the difference from Greenwich Mean Time. Length Unit Choose the display unit for length. Change the unit displayed for the remaining amount of roll paper, Tot.Print Area, and so on. Detect Mismatch Specify printing behavior if the type and size of paper specified in the printer menu does not match the type and size in the printer driver. Choose Pause to have printing paused under these circumstances. Choose Warning to continue printing after notification. Choose None to continue printing without notification. Paper Roll Selection 1 Size Basis If roll size detection is activated, choose whether ISO A3 (297mm) or 300mm Roll is applied when a roll of an intermediate width is detected. Roll Selection 2 If roll size detection is activated, choose whether 10in. (254mm) or JIS B4 (257mm) is applied when a roll of an 423 intermediate width is detected. Keep Paper Size Choose On to use the paper size setting as the basis for printing instead of other settings. The margin setting of the printer menu will be used instead of the margin setting of the printer driver if the latter is smaller, which may prevent text or images in the margin from being printed. User's Guide