Canon imagePROGRAF iPF770 User Guide - Page 421
No Setting, Circle Setting, Software, Define Palette
View all Canon imagePROGRAF iPF770 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 421 highlights
iPF770 GL2 Settings Paper Manager Setting Item Paper Source Margin Conserve Paper Auto Rotate Line & Pen Manager Enable merge Pen Set- Select Palette up Define Palette Reset Palette Smoothing Menu Settings Description, Instructions Choose the source of paper for HP-GL/2 printing. Specify the margin around paper. The margin for the trailing edge of sheets is 23 mm (0.9 in). However, if you have specified the leading margin in Paper Details, the larger of the setting values has priority. Conserves paper when printing. If the long side of an original is shorter than the roll width, the original is automatically rotated 90 degrees to conserve paper. Similarly, if the long side of an original in landscape orientation is longer than the roll width and the short side is shorter than the roll width, the original is repositioned to fit on the paper. HP RTL print jobs are not rotated. Because HP RTL images are not rotated even if the paper is rotated 90 degrees, images may be cut off or the blank paper may be ejected. In this case, set Auto Rotate to Off. Specify whether to merge or print over colors where lines overlap. Choose Off to print the second line over the first. Choose On to merge all overlapping colors. As pen values, choose Software, Palette A, Palette B, or Factory. Choose Software to print according to software settings. Choose Palette A or Palette B to print using the value specified in Define Palette. Specify the Width, Color, and Line Attributes in the palette Pen no.. Choose Factory to confirm the values when Factory is selected in Select Palette. In Line Attributes, choose No Setting or Circle Setting as the processing for the ends and junctions of lines. • If you choose No Setting • If you choose Circle Setting Restore Define Palette to the default palette settings. Choose whether to print arcs as smooth curved lines or as multiple connected line segments. • If you choose Software Operation is determined by the application. If nothing is specified by the application, the result is as shown in the figure. 421 Printer Menu Control Panel User's Guide Note: By default, this is a 72-sided figure