Canon s2is PowerShot S2 IS Camera User Guide - Page 100
Shooting in the Color Accent Mode, Shooting in the Color Swap Mode
UPC - 013803051629
View all Canon s2is manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Shooting in the Color Accent Mode Colors other than the color specified in the LCD monitor are shot in black and white. 1 Set the mode dial to (My Colors), select (Color Accent) from the FUNC. menu and press the SET button. z See Shooting in a My Colors Mode (p. 95). z All colors but the previously specified one display in black and white. z The camera switches to color input mode and the display alternates between the original image and the color accent image (the default setting is green). 2 Aim the camera so that the color you wish to retain appears at the center of the LCD monitor and press the W button. z Only one color can be specified. z You can use the S or T button to adjust the retained color (±5 levels). z You can shoot right after selecting an option. The menu displays again after the shot so you can easily adjust the setting. 3 Press the SET button. The color input mode will no longer be in effect. You may not obtain the expected results after color input mode if you use the flash, or change the white balance or metering settings. The chosen Color Accent is retained even if the camera's power is turned off. Exposure compensation is disabled while (Color Accent) is enabled. Shooting in the Color Swap Mode This mode allows you to transform a color specified in the LCD monitor into another. 98