Canon s2is PowerShot S2 IS Camera User Guide - Page 166
Replacing the Date Battery, Warning
![]() |
UPC - 013803051629
View all Canon s2is manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 166 highlights
Replacing the Date Battery If the Set Date/Time menu appears when you turn on the camera power, the date battery charge is low and the date and time settings have been lost. Please replace the battery with a commercially available lithium coin battery (CR1220) with the following procedures. Please note that the first date battery may appear to expire relatively quickly after you purchase the camera. This is because it is installed in the camera at the point of manufacture, not when you make the purchase. Warning Be particularly careful to keep the date batteries out of the reach of children. Seek medical assistance immediately if a child swallows a battery since corrosive battery fluids could damage the stomach or intestinal wall. 1 Turn off the power and slide the battery cover in the direction of the arrows. 2 Remove the AA-size batteries, then pull out the battery holder by hooking your fingertip under the bottom of the battery holder edge. 3 Remove the old date battery and place a new date battery into the date battery holder with the positive terminal (+) facing upward. Positive terminal (+) 4 Replace the date battery holder, replace the AA-size batteries and close the battery cover. If you ever dispose of your camera, first remove the date battery for recycling according to the recycling system of your country. Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet weggoolen maar inleveren als KCA 164
![](/manual_guide/products/canon-s2is-powershot-s2-camera-user-guide-d963691/166.png)