Canon s2is PowerShot S2 IS Camera User Guide - Page 106
subject on which you wish to lock the flash exposure
![]() |
UPC - 013803051629
View all Canon s2is manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
In mode, AE lock can be set or canceled (p. 65). Automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure (Program Shift). With the following procedures. 1. Turn the mode dial to , or . 2. Focus on the subject on which you wish to lock the exposure and press the shutter button halfway. 3. Press the button. The exposure setting locks and appears on the LCD monitor (or viewfinder). 4. Press the W or X button until the desired shutter speed or aperture value is reached. 5. Recompose the image and shoot. The setting will cancel after the shot is taken. Locking the Flash Exposure Setting (FE Lock) Mode Dial You can obtain the correct exposure regardless of the location of your subject in the composition. 1 Raise the flash and display viewfinder) (p. 40) on the LCD monitor (or When is displayed, press the button and set to . 2 Focus the AF frame or the spot metering frame on the subject on which you wish to lock the flash exposure setting and press the shutter button halfway. 104
![](/manual_guide/products/canon-s2is-powershot-s2-camera-user-guide-d963691/106.png)