Cisco 6921 Administration Guide - Page 113
Streaming Statistics
UPC - 882658277764
View all Cisco 6921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Chapter 8 Monitoring the Cisco Unified IP Phone Remotely Streaming Statistics Streaming Statistics A Cisco Unified IP Phone can stream information to and from up to three devices simultaneously. A phone streams information when it is on a a call or running a service that sends or receives audio or data. The streaming statistics areas on a phone's web page provide information about the streams. Cisco Unified IP Phones 6900 Series use only Stream 1. To display a Streaming Statistics area, access the web page for the phone as described in the "Accessing the Web Page for a Phone" section on page 8-2, and then click the Stream 1 hyperlink. Table 8-5 describes the items in the Streaming Statistics areas. Table 8-5 Streaming Statistics Area Items Item Remote Address Local Address Start Time Stream Status Host Name Sender Packets Sender Octets Sender Codec Sender Reports Sent1 Sender Report Time Sent1 Rcvr Lost Packets Avg Jitter Rcvr Codec Rcvr Reports Sent1 Rcvr Report Time Sent1 Rcvr Packets Rcvr Octets Cumulative Conceal Ratio Description IP address and UDP port of the destination of the stream. IP address and UPD port of the phone. Internal time stamp indicating when Cisco Unified Communications Manager requested that the phone start transmitting packets. Indication of whether streaming is active or not. Unique, fixed name that is automatically assigned to the phone based on its MAC address. Total number of RTP data packets transmitted by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Total number of payload octets transmitted in RTP data packets by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Type of audio encoding used for the transmitted stream. Number of times the RTCP Sender Report have been sent. Internal time stamp indication when the last RTCP Sender Report was sent. Total number of RTP data packets that have been lost since starting receiving data on this connection. Defined as the number of expected packets less the number of packets actually received, where the number of received packets includes any that are late or duplicate. The value displays as 0 if the connection was set to send-only mode. Estimate of mean deviation of the RTP data packet inter-arrival time, measured in milliseconds. The value displays as 0 if the connection was set to send-only mode. Type of audio encoding used for the received stream. Number of times the RTCP Receiver Reports have been sent. Internal time stamp indication when a RTCP Receiver Report was sent. Total number of RTP data packets received by the phone since starting receiving data on this connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. Total number of payload octets received in RTP data packets by the device since starting reception on the connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. Total number of concealment frames divided by total number of speech frames received from start of the voice stream. Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP) OL-19025-01 8-9