Cisco 6921 Administration Guide - Page 73

Chapter 5 Configuring Features, Templates, Services, and Users Telephony Features Available for the Cisco Unified IP Phone Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued) Feature Description Configuration Reference Do Not Disturb (DND) When DND is turned on, either no audible rings occur during the ringing-in state of a call, or no audible or visual notifications of any type occur. You can configure the phone to have a softkey template with a DND softkey or a phone-button template with DND as one of the selected features. For more information, go to the "Do Not Disturb" chapter in the Cisco Unified Communications Manager Features and Services Guide. The following DND-related parameters are configurable in Cisco Unified Communications Manager Administration: • Do Not Disturb-This check box allows you to enable DND on a per-phone basis. Use Cisco Unified Communications Manager Administration > Device > Phone > Phone Configuration. • DND Incoming Call Alert-Choose the type of alert to play, if any, on a phone for incoming calls when DND is active. This parameter is located on both the Common Phone Profile page and the Phone configuration page (Phone Configuration window value takes precedence). • BLF Status Depicts DND-Enables DND status to override busy/idle state. Fast Dial Service Allows a user to enter a Fast Dial code to place a call. Fast Dial codes can be assigned to phone numbers or Personal Address Book entries. (See "Services" in this table.) For more information, see Modifying a Phone Button Template for Personal Address Book or Speed Dials, page 5-15. Forced authorization codes (FAC) Controls the types of calls that certain users can place. For more information, go to the "Client Matter Codes and Forced Authorization Codes" chapter in the Cisco Unified Communications Manager Features and Services Guide. Group call pickup Allows a user to answer a call that is ringing on a For more information, go to the "Call Pickup" directory number in another group. chapter in the Cisco Unified Communications Manager Features and Services Guide. Hold Reversion Limits the amount of time that a call can be on hold before reverting back to the phone that put the call on hold and alerting the user. Reverting calls are distinguished from incoming calls by a single ring (or beep, depending on the new call indicator setting for the line). This notification repeats at intervals if not resumed. For more information about configuring this feature, go to the "Hold Reversion" chapter in the Cisco Unified Communications Manager Features and Services Guide. A call that triggers Hold Reversion also displays an animated icon in the call bubble. You can configure call focus priority to favor incoming or reverting calls. Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP) OL-19025-01 5-7