Cisco 6921 Administration Guide - Page 64
IPv4 Setup Menu Options
UPC - 882658277764
View all Cisco 6921 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
IPv4 Setup Menu Options Chapter 4 Configuring Settings on the Cisco Unified IP Phone IPv4 Setup Menu Options The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the IPv4 option on the Network Setup menu. Table 4-2 describes the IPv4 Setup menu options. For information about the keys you can use to edit options, see the "Editing Values" section on page 4-3. Table 4-2 IPv4 Setup Menu Options Option DHCP IP Address Subnet Mask Default Router 1 DNS Server 1 Description To Change Indicates whether the phone has DHCP enabled or disabled. When DHCP is enabled, the DHCP server assigns the phone an IPaddress. When DHCP is disabled, the administrator must manually assign an IP address to the phone. Scroll to the DHCP option, press the Edit softkey, then press either the No softkey to disable DHCP, or press the Yes softkey to enable DHCP. Internet Protocol (IP) address of the phone. 1. Set the DHCP option to No. If you assign an IP address with this option, you must also 2. Scroll to the IP Address option, assign a subnet mask and default router. See the Subnet press the Edit softkey, and then Mask and Default Router options in this table. enter a new IP Address. 3. Press the Apply softkey, then press Save. Subnet mask used by the phone. 1. Set the DHCP Enabled option to No. 2. Scroll to the Subnet Mask option, press the Edit softkey, and then enter a new subnet mask. 3. Press the Apply softkey, then press Save. Default router used by the phone (Default Router 1). 1. Set the DHCP Enabled option to No. 2. Scroll to the appropriate Default Router option, press the Edit softkey, and then enter a new router IP address. 3. Press the Apply softkey, then press Save. Primary Domain Name System (DNS) server (DNS Server 1) and optional backup DNS servers (DNS Server 2-5) used by the phone. 1. Set the DHCP Enabled option to No. 2. Scroll to the appropriate DNS Server option, press the Edit softkey, and then enter a new DNS server IP address. 3. Press the Apply softkey, then press Save. Cisco Unified IP Phone 6921, 6941, and 6961 Administration Guide for Cisco Unified Communications Manager 7.1 (SCCP) 4-6 OL-19025-01