Cisco 7604 Configuration Guide - Page 639

Appendix B Sample Configurations Figure B-5 Example 5 Transparent Mode Sample Configurations Internet VLAN 151 VLAN 150 VLAN 152 VLAN 153 Admin Context outside customerA outside customerB outside customerC outside 10.1.1.1 10.1.2.1 10.1.3.1 10.1.4.1 inside inside inside inside Management host 10.1.1.75 VLAN 4 10.1.1.3 192.168.1.1 VLAN 5 10.1.2.3 192.168.2.1 VLAN 6 10.1.3.3 192.168.3.1 VLAN 7 10.1.4.3 192.168.4.1 Admin Network 2 customerA Network 2 customerB Network 2 customerC Network 2 132981 See the following sections for the configurations for this scenario: • System Configuration (Example 5), page B-15 • Admin Context Configuration (Example 5), page B-16 • Customer A Context Configuration (Example 5), page B-17 • Customer B Context Configuration (Example 5), page B-17 • Customer C Context Configuration (Example 5), page B-18 System Configuration (Example 5) You must first enable multiple context mode using the mode multiple command. The mode is not stored in the configuration file, even though it endures reboots. If you view the configuration on FWSM using the write terminal, show startup-config, or show running-config commands, the mode displays after the FWSM Release (blank means single mode, "" means you are in multiple mode in the system configuration, and means you are in multiple mode in a context). hostname Farscape password passw0rd enable password chr1cht0n interface vlan 4 interface vlan 5 interface vlan 6 OL-20748-01 Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM B-15