Cisco 7604 Configuration Guide - Page 94

Configuring a Security Context Chapter 4 Configuring Security Contexts Step 5 Step 6 The server must be accessible from the admin context. The filename does not require a file extension, although we recommend using ".cfg". If the configuration file is not available, you see the following message: WARNING: Could not fetch the URL ftp://url INFO: Creating context with default config You can then change to the context, configure it at the CLI, and enter the write memory command to write the file to the FTP server. • http[s]://[user[:password]@]server[:port]/[path/]filename The server must be accessible from the admin context. The filename does not require a file extension, although we recommend using ".cfg". If the configuration file is not available, you see the following message: WARNING: Could not fetch the URL http://url INFO: Creating context with default config If you change to the context and configure the context at the CLI, you cannot save changes back to HTTP or HTTPS servers using the write memory command. You can, however, use the copy tftp command to copy the running configuration to a TFTP server. • tftp://[user[:password]@]server[:port]/[path/]filename[;int=interface_name] The server must be accessible from the admin context. Specify the interface name if you want to override the route to the server address. The filename does not require a file extension, although we recommend using ".cfg". If the configuration file is not available, you see the following message: WARNING: Could not fetch the URL tftp://url INFO: Creating context with default config You can then change to the context, configure it at the CLI, and enter the write memory command to write the file to the TFTP server. To change the URL, reenter the config-url command with a new URL. See the "Changing the Security Context URL" section on page 4-33 for more information about changing the URL. For example, enter the following command: hostname(config-ctx)# config-url ftp://user1:[email protected]/configlets/test.cfg (Optional) To assign the context to a resource class, enter the following command: hostname(config-ctx)# member class_name If you do not specify a class, the context belongs to the default class. You can only assign a context to one resource class. For example, to assign the context to the gold class, enter the following command: hostname(config-ctx)# member gold (Optional) To map a context to a specific memory partition, enter the following command: hostname(config-ctx)# allocate-acl-partition partition_number The partition_number is an integer from 0 to the number of partitions available, minus 1. The default is 12 partitions, so the range is 0 to 11. See the "Setting the Number of Memory Partitions" section on page 4-13 to configure the number of memory partitions. 4-30 Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM OL-20748-01