Cisco 7604 Configuration Guide - Page 90

Configuring Resource Management Chapter 4 Configuring Security Contexts Table 4-2 Resource Names and Limits Resource Name mac-addresses conns fixups hosts ipsec asdm ssh Minimum and Maximum Number per Context Total Number for System Description N/A 65,535 concurrent For transparent firewall mode, the number of MAC addresses allowed in the MAC address table. N/A 999,900 concurrent TCP or UDP connections between any two 102,400 per second (rate) hosts, including connections between one host and multiple other hosts. Note For concurrent connections, the FWSM allocates half of the limit to each of two network processors that accept connections. Typically, the connections are divided evenly between the NPs. However, in some circumstances, the connections are not evenly divided, and you might reach the maximum connection limit on one NP before reaching the maximum on the other. In this case, the maximum connections allowed is less than the limit you set. The NP distribution is controlled by the switch based on an algorithm. You can adjust this algorithm on the switch, or you can adjust the connection limit upward to account for the inequity. N/A 10,000 per second (rate) Application inspection. N/A 262,144 concurrent Hosts that can connect through the FWSM. 1 minimum 10 concurrent IPSec sessions. 5 maximum concurrent 1 minimum 80 concurrent ASDM management sessions. 5 maximum concurrent Note ASDM sessions use two HTTPS connections: one for monitoring that is always present, and one for making configuration changes that is present only when you make changes. For example, the system limit of 80 ASDM sessions represents a limit of 160 HTTPS sessions. 1 minimum 100 concurrent SSH sessions. 5 maximum concurrent 4-26 Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM OL-20748-01