Cisco 7604 Configuration Guide - Page 647

Appendix B Sample Configurations Failover Example Configurations Figure B-7 Example 7 VLANs 200-202 Internet VLAN 100 Active Switch MSFC HSRP IPs: 10.0.n.4 Standby Switch MSFC HSRP IPs: 10.0.n.4 Primary FWSM Mgmt IPs: 10.0.1.1 10.0.3.1 10.0.2.1 Failover Links: Trunk: VLAN 10 VLANs 10 and 11 VLAN 11 Mgmt IPs: 10.0.3.2 Secondary FWSM 10.0.1.2 10.0.2.2 148179 Context A VLAN 4 Context B VLAN 5 Context C VLAN 6 See the following sections for the configurations for this scenario: • Primary FWSM Configuration (Example 7), page B-23 • Secondary FWSM System Configuration (Example 7), page B-26 • Switch Configuration (Example 7), page B-26 Primary FWSM Configuration (Example 7) The following sections include the configuration for the primary FWSM: • System Configuration (Primary Unit-Example 7), page B-23 • Context A Configuration (Primary Unit-Example 7), page B-24 • Context B Configuration (Primary Unit-Example 7), page B-25 • Context C Configuration (Primary Unit-Example 7), page B-25 System Configuration (Primary Unit-Example 7) You must first enable multiple context mode using the mode multiple command. Then enter the activation key to allow more than two contexts using the activation-key command. The mode and the activation key are not stored in the configuration file, even though they do endure reboots. If you view OL-20748-01 Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM B-23