Cisco ASR1006 Configuration Guide - Page 392
Example: Frame Relay-to-ATM Bridged Interworking on a Frame Relay-PE Router, Step 34
UPC - 882658196423
View all Cisco ASR1006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 392 highlights
Configuring Frame Relay DLCI-to-ATM AAL5SNAP Bridged Interworking Configuring MPLS Layer 2 VPNs Command or Action Step 34 connect connection-name interface dlci l2transport Step 35 Example: Router(config)# connect fr-atm-2 Serial0/3/0:0 101 l2transport xconnect peer-ip-address vc-id encapsulation mpls pw-class pw-class-name Purpose Defines connections between the Frame Relay PVCs. Binds an attachment circuit to a pseudowire and configures an AToM static pseudowire. Step 36 Example: Router(config-conn)# xconnect 190.1.1.1 100 encapsulation mpls pw-class atm-fr-bridged exit Exits the global configuration mode. Example: Frame Relay-to-ATM Bridged Interworking on a Frame Relay-PE Router The following example shows the configuration of the Frame Relay-to-ATM Bridged Interworking feature on a Frame Relay-PE router: ipv6 unicast-routing mpls label protocol ldp mpls ip default-route mpls ldp graceful-restart frame-relay switching xconnect logging pseudowire status ! controller T1 0/3/0 framing esf clock source internal linecode b8zs cablelength long 0db channel-group 0 timeslots 1-24 ! pseudowire-class atm-fr-bridged encapsulation mpls interworking ethernet ! interface Loopback0 ip address 190.1.1.1 255.255.255.255 ! interface Serial0/3/0:0 no ip address encapsulation frame-relay frame-relay intf-type dce frame-relay interface-dlci 101 switched ! interface GigabitEthernet1/3/1 ip address 10.10.1.1 255.255.255.0 negotiation auto mpls ip ! connect fr-atm-2 Serial0/3/0:0 101 l2transport xconnect 44.1.1.2 100 pw-class atm-fr-bridged ! Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide 16