Cisco SFS-7012 User Guide - Page 48

Managed, showChassisIpAddr

Get Cisco SFS-7012 - SFS InfiniBand Server Switch 7012 PDF manuals and user guides View all Cisco SFS-7012 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 48 highlights

Chapter Note If the spine module RS-232 port is connected to a terminal emulation program, the user will be able to view the switch boot process. Be certain to use a null-modem/crossover serial cable for the console port. The settings for the terminal emulation device should be: - 8 data bits - no parity bits - 1 stop bit - 56K baud - Use VT100 emulation. - Flow control = XON/XOFF Figure 2-14 SFS 7012 RS-232 Connector 3 (Unmanaged) Fan 3 2 (Managed) 1 (Managed) Fan PS PS PS 1 3 21 Spine Module RS-232 Port Step 3 Verify the IP address with the command line interface (CLI) command showChassisIpAddr command. The system returns the information similar to the following: Chassis IP Address: 192.168.100.9 Net mask: 0xffffff00 Changing the SFS 7012 IP Address and Default Gateway via the CLI The CLI can be accessed via Telnet, SSH, or through the SFS 7012 RS232 serial ports. Step 1 Connect null-modem/crossover serial cables to the RS-232 ports of the SFS 7012. If using a terminal emulation device, the settings should be: - 8 data bits - no parity bits - 1 stop bit - 56K baud - Use VT100 emulation. - Flow control = XON/XOFF Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide 30 OL-8787-04

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
30
Cisco SFS 7012 InfiniBand Server Switch Hardware Users Guide
OL-8787-04
Chapter
Note
If the spine module RS-232 port is connected to a terminal emulation program, the user will be able to
view the switch boot process. Be certain to use a
null-modem/crossover
serial cable for the console port.
The settings for the terminal emulation device should be:
–
8 data bits
–
no parity bits
–
1 stop bit
–
56K baud
–
Use VT100 emulation.
–
Flow control = XON/XOFF
Figure 2-14
SFS 7012 RS-232 Connector
Step 3
Verify the IP address with the command line interface (CLI) command
showChassisIpAddr
command. The system returns the information similar to the following:
Chassis IP Address:
192.168.100.9
Net mask: 0xffffff00
Changing the SFS 7012 IP Address and Default Gateway via the CLI
The CLI can be accessed via Telnet, SSH, or through the SFS 7012 RS232 serial ports.
Step 1
Connect null-modem/crossover serial cables to the RS-232 ports of the SFS 7012. If using a terminal
emulation device, the settings should be:
–
8 data bits
–
no parity bits
–
1 stop bit
–
56K baud
–
Use VT100 emulation.
–
Flow control = XON/XOFF
1 (Managed)
Spine Module
RS-232 Port
Fan
3
Fan
1
PS
3
PS
2
PS
1
2 (Managed)
3 (Unmanaged)