Cisco WS-C2950T-24 Hardware Installation Guide - Page 145

Chapter 4 Configuring the Router Performing the Initial Configuration on the Router Step 4 Command or Action ip route dest-prefix mask next-hop-ip-address [admin-distance] [permanent] Purpose Establishes a static route. Step 5 Example: Router(config)# ip route 192.168.24.0 255.255.255.0 172.28.99.2 ip default-network network-number or ip route dest-prefix mask next-hop-ip-address Example: Router(config)# ip default-network 192.168.24.0 Selects a network as a candidate route for computing the gateway of last resort. Creates a static route to network 0.0.0.0 0.0.0.0 for computing the gateway of last resort. Step 6 Example: Router(config)# ip route 0.0.0.0 0.0.0.0 172.28.99.1 end Returns to privileged EXEC mode. Step 7 Example: Router(config)# end show ip route Example: Router# show ip route Displays the current routing table information. • Verify that the gateway of last resort is set. Examples Specifying a Default Route: Example ! ip routing ! ip route 192.168.24.0 255.255.255.0 172.28.99.2 ! ip default-network 192.168.24.0 ! Sample Output for the show ip route Command Router# show ip route Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, * - candidate default Gateway of last resort is 172.28.99.2 to network 192.168.24.0 172.24.0.0 255.255.255.0 is subnetted, 1 subnets C 172.24.192.0 is directly connected, FastEthernet0 S 172.24.0.0 255.255.0.0 [1/0] via 172.28.99.0 S* 192.168.24.0 [1/0] via 172.28.99.2 172.16.0.0 255.255.255.0 is subnetted, 1 subnets C 172.16.99.0 is directly connected, FastEthernet1 Router# OL-18712-01 Cisco 2900 and 3900 Series Hardware Installation 4-17