Cisco WS-C2950T-24 Hardware Installation Guide - Page 88
Attaching Rack-Mount Brackets to Cisco 2911, Cisco 2921, and Cisco 2951 Routers,
View all Cisco WS-C2950T-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Installing the Router Chapter 3 Installing and Connecting the Router Figure 3-2 Bracket Installation for Back Mounting DNOENTOWTORREKMOOPVEERDATUIROINNG DNOENTOWTORREKMOOPVEERDATUIROINNG 250967 1 Figure 3-3 shows how to attach the brackets to the sides of the router with center mounting. Figure 3-3 Bracket Installation for Center Mounting SYS ACT POE Cisco 2900 Series 250964 Attaching Rack-Mount Brackets to Cisco 2911, Cisco 2921, and Cisco 2951 Routers Attach the mounting brackets to the router chassis as shown in Figure 3-4 through Figure 3-7, using the screws provided. Caution Do not over torque the screws. The recommended torque is 15 to 18 inch-lb (1.7 to 2.0 N-m). Attach the second bracket to the opposite side of the chassis. Use a number-2 Phillips screwdriver to install the number-8 bracket screws. Caution Your chassis installation must allow unrestricted airflow for chassis cooling. Cisco 2900 and 3900 Series Hardware Installation 3-6 OL-18712-01