Cisco WS-CBS3020-HPQ Installation Guide - Page 116
Installing the Switch
View all Cisco WS-CBS3020-HPQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
Installing the Switch Appendix B Installation In a Hazardous Environment Installing the Switch These sections describes how to install the switch: • Installing the Switch on a DIN Rail • Installing the Switch on a Wall • Installing the Switch in a Rack Warning This equipment is supplied as "open type" equipment. It must be mounted within an enclosure that is suitably designed for those specific environmental conditions that will be present and appropriately designed to prevent personal injury resulting from accessibility to live parts. The interior of the enclosure must be accessible only by the use of a tool. The enclosure must meet IP 54 or NEMA type 4 minimum enclosure rating standards. Statement 1063 Warning When used in a Class I, Division 2, hazardous location, this equipment must be mounted in a suitable enclosure with proper wiring method, for all power, input and output wiring, that complies with the governing electrical codes and in accordance with the authority having jurisdiction over Class I, Division 2 installations. Statement 1066 Caution To prevent the switch from overheating, ensure these minimum clearances: - Top and bottom: 4.13 in. (105 mm) - Exposed side (not connected to the module): 3.54 in. (90 mm) - Front: 2.56 in. (65 mm) B-26 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01