Cisco WS-CBS3020-HPQ Installation Guide - Page 52
Pushing the DIN Rail Latches In, Otherwise
View all Cisco WS-CBS3020-HPQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Installing the Switch Chapter 2 Switch Installation Step 4 Push the DIN rail latches in after the switch is over the DIN rail. See Figure 2-21. Figure 2-21 Pushing the DIN Rail Latches In 201829 Note If you are using a 15-mm DIN rail, rotate all the feet (see Figure 2-21) to the extended positions. Otherwise, rotate all the feet to the recessed positions. Figure 2-22 shows the two DIN rails. You can use either the 7.5-mm or the 15-mm DIN rail. 2-26 Cisco IE 3000 Switch Hardware Installation Guide OL-13017-01
2-26
Cisco IE 3000 Switch Hardware Installation Guide
OL-13017-01
Chapter 2
Switch Installation
Installing the Switch
Step 4
Push the DIN rail latches in after the switch is over the DIN rail. See
Figure 2-21
.
Figure 2-21
Pushing the DIN Rail Latches In
Note
If you are using a 15-mm DIN rail, rotate all the feet (see
Figure 2-21
) to the extended positions.
Otherwise, rotate all the feet to the recessed positions.
Figure 2-22
shows the two DIN rails. You
can use either the 7.5-mm or the 15-mm DIN rail.
201829