Cisco WS-CBS3020-HPQ Installation Guide - Page 4
Installing the Power Converter on a DIN Rail, Wall, or Rack Adapter - console
View all Cisco WS-CBS3020-HPQ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Contents Installation Guidelines 2-3 Environment and Enclosure Guidelines: 2-3 Other Guidelines 2-3 Verifying Package Contents 2-5 Adding Modules to the Switch 2-5 Expansion Module Configurations 2-5 Connecting Modules 2-8 Installing or Removing the Compact Flash Memory Card 2-10 Verifying Switch Operation 2-11 Connecting a PC or a Terminal to the Console Port 2-12 Connecting the Protective Ground and DC Power 2-13 Grounding the Switch 2-13 Wiring the DC Power Source 2-16 Attach the Power and Relay Connector to the Switch 2-21 Running POST 2-22 Power On the Switch 2-22 Verify POST Results 2-22 Disconnect Power 2-22 Installing the Switch 2-23 Installing the Switch on a DIN Rail 2-23 Installing the Switch on the Wall 2-27 Installing the Switch in a Rack 2-29 Removing the Switch from a DIN Rail or a Rack 2-31 Connecting Power and Alarm Circuits 2-32 Wiring the Protective Ground and DC Power 2-32 Wiring the External Alarms 2-33 Connecting Destination Ports 2-36 Connecting to 10/100 and 10/100/1000 Ports 2-36 Installing and Removing SFP Modules 2-37 Installing SFP Modules into SFP Module Slots 2-38 Removing SFP Modules from SFP Module Slots 2-40 Connecting to SFP Modules 2-41 Connecting to a Dual-Purpose Port 2-42 Connecting to 100BASE-FX Ports 2-43 Connecting the Switch to the Power Converter 2-44 Attaching the Power Converter to the Switch 2-45 Installing the Power Converter on a DIN Rail, Wall, or Rack Adapter 2-46 Connecting the DC Power Clip 2-46 Connecting the Power Converter to an AC Power Source 2-47 Cisco IE 3000 Switch Hardware Installation Guide iv OL-13017-01