Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 22
Refer to Authorized Compaq, Dealer Service Bulletin No. 84.
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
unexpected 101 - 95 Coprocessor and processor board conflict 101 - 96 Refer to Authorized Compaq Dealer Service Bulletin No. 84. Error Recommended Code Description Action 102 - 01 Coprocessor initial status The following steps apply word incorrect to error codes 102 - xx: 1. Run COMPAQ EISA 102 - 02 Coprocessor initial control Configuration utility. word incorrect 2. Replace the processor board and retest. 102 - 03 Coprocessor tag word not all ones 102 - 04 Coprocessor tag word not all zeros 102 - 05 Coprocessor exchange command failed 102 - 06 Coprocessor masked exception incorrectly handled 102 - 07 Coprocessor unmasked exception incorrectly handled 102 - 08 Coprocessor wrong mask bit set in status register 102 - 09 Coprocessor unable to store real number 102 - 10 Coprocessor real number calculation test failed 102 - 11 Coprocessor speed test failed 102 - 12 Coprocessor pattern test failed 102 - 14 Switch indicates no numeric coprocessor present 102 - 15 Coprocessor is inoperative Error Recommended Code Description Action 103 - 01 DMA page registers test Replace the processor failed board and retest for error codes 103 - xx 103 - 02 DMA byte controller test through 114 - xx. failed