Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 31
Replace the I/O board, Failed to verify diskette - hard drive
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
610 - 02 Exceeded maximum hard error limit 610 - 03 Previously exceeded maximum soft error limit Error Recommended Code Description Action 610 - 04 Previously exceeded The following steps apply maximum hard error limit to error codes 600 - xx through 610 - xx: 610 - 05 Failed to reset controller 1. Replace the diskette and retest. 610 - 06 Fatal error while reading 2. Replace the diskette drive and retest. 610 - 07 Fatal error while writing 3. Replace the I/O board and retest. 610 - 08 Failed compare of 4. Replace the power write/read buffers distribution board and retest. 610 - 09 Failed to format a track 610 - 10 Failed sector wrap test 610 - 20 Failed to get drive type 610 - 21 Failed to get change line status 610 - 22 Failed to clear change line status 610 - 23 Failed to set drive type in ID media 610 - 24 Failed to read diskette media 610 - 25 Failed to verify diskette media 610 - 26 Failed to read media in speed test 610 - 27 Failed speed limits 610 - 28 Failed write protect test Error Recommended Code Description Action 697 - 00 Diskette type error The following steps apply to error codes 697 - xx and 698 - xx: 698 - 00 Diskette drive speed 1. Replace the diskette not within limits and retest. 2. Replace the diskette drive and retest.