Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 40
Write probably ID error, NEC fatal error
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
1906 - 08 Unable to servo write Error Recommended Code Description Action 1906 - 09 Unable to format The following steps apply to error codes 1901 - xx 1906 - 10 Format mode error through 1906 - xx: 1. Replace the tape 1906 - 11 Drive recalibration error cartridge and retest. 2. Replace the tape 1906 - 12 Tape not servo written drive and retest. 3. Replace the I/O board 1906 - 13 Tape not formatted and retest. 1906 - 14 Drive timeout error 1906 - 15 Sensor error flag 1906 - 16 Block locate (block ID) error 1906 - 17 Soft error limit exceeded 1906 - 18 Hard error limit exceeded 1906 - 19 Write (probably ID) error 1906 - 20 NEC fatal error 1906 - 21 Received servo pulses second time but not first 1906 - 22 Never got to EOT after servo check Error Recommended Code Description Action 1906 - 23 Change line not set The following steps apply to error codes 1901 - xx 1906 - 24 Write protect error through 1906 - xx: 1. Replace the tape 1906 - 25 Unable to erase cartridge cartridge and retest. 2. Replace the tape 1906 - 26 Cannot identify drive drive and retest. 3. Replace the I/O board 1906 - 27 Drive not compatible with and retest. controller 1906 - 28 Format gap error 1906 - 30 Exception bit not set 1906 - 31 Unexpected drive status 1906 - 32 Device fault 1906 - 33 Illegal command