Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 73
Fixed Disk Drive, To remove the fixed disk drive, complete the following steps
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
3. Using a Torx T-15 screwdriver, remove the screws securing the diskette drive cage; then swing the drive cage out (Figure 5-17). 4. Using a Torx T-15 screwdriver, remove four screws securing the diskette drive to the drive cage (Figure 5-17). To replace the diskette drive, reverse the steps in the above illustration. Fixed Disk Drive To remove the fixed disk drive, complete the following steps: 1. Remove the base panel (Section 5.12). 2. Carefully disconnect the two cables from the fixed disk drive (Figure 5-18).
3. Using a Torx T-15 screwdriver, remove the screws securing the diskette
drive cage; then swing the drive cage out (Figure 5-17).
4. Using a Torx T-15 screwdriver, remove four screws securing the diskette
drive to the drive cage (Figure 5-17).
To replace the diskette drive, reverse the steps in the above illustration.
Fixed Disk Drive
To remove the fixed disk drive, complete the following steps:
1. Remove the base panel (Section 5.12).
2. Carefully disconnect the two cables from the fixed disk drive
(Figure 5-18).