Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 75
Active Matrix Color Display, Front Bezel
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 5.14 Active Matrix Color Display Front Bezel To remove the front bezel, complete the following steps: 1. Remove the keyboard (Section 5.5). 2. Pull the brightness and volume controls off (Figure 5-20). 3. Remove four plastic screw covers from the front bezel (Figure 5-20 WARNING The display inverter board contains high voltage. Avoid contact with all surfaces of the display inverter board when removing the front bezel 4. Using a Torx T-15 screwdriver, remove four Plastite screws securing the front bezel (Figure 5-20). 5. Pull the front bezel out from the display assembly (Figure 5-20). To replace the front bezel, reverse the steps in the above illustration.
Chapter 5.14 Active Matrix Color Display
Front Bezel
To remove the front bezel, complete the following steps:
1. Remove the keyboard (Section 5.5).
2. Pull the brightness and volume controls off (Figure 5-20).
3. Remove four plastic screw covers from the front bezel (Figure 5-20).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
WARNING
The display inverter board contains high voltage. Avoid contact with all
surfaces of the display inverter board when removing the front bezel.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>><<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
4. Using a Torx T-15 screwdriver, remove four Plastite screws securing the
front bezel (Figure 5-20).
5. Pull the front bezel out from the display assembly (Figure 5-20).
To replace the front bezel, reverse the steps in the above illustration.