Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 80
Speaker Assembly, Remove the keyboard
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
6. Pull the display inverter board insulator aside to gain access to the screws (Figure 5-23). 7. Using a Torx T-15 screwdriver, remove five screws securing the display inverter board (Figure 5-23). To replace the display inverter board, reverse the steps in the above illustration. Speaker Assembly To remove the speaker assembly from the display inverter board, complete the following steps: 1. Remove the keyboard (Section 5.5). 2. Remove the front bezel (Section 5.14). 3. Carefully disconnect the speaker assembly cable from the display inverter board (Figure 5-24).
6. Pull the display inverter board insulator aside to gain access to the
screws (Figure 5-23).
7. Using a Torx T-15 screwdriver, remove five screws securing the display
inverter board (Figure 5-23).
To replace the display inverter board, reverse the steps in the above
illustration.
Speaker Assembly
To remove the speaker assembly from the display inverter board, complete the
following steps:
1. Remove the keyboard (Section 5.5).
2. Remove the front bezel (Section 5.14).
3. Carefully disconnect the speaker assembly cable from the display inverter
board (Figure 5-24).