Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 63
Options Cover, options cover
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
with the appropriate slots. 2. Slide the rear panel down and forward, and secure with the two screws using a Torx T-15 screwdriver. Chapter 5.7 Options Cover To remove the options cover, complete the following steps: 1. Remove the rear panel (Section 5.6). 2. Using a Torx T-15 screwdriver, remove three screws from the top of the options cover (Figure 5-7). 3. Loosen two slotted screws (Figure 5-8). 4. Lift the options cover off of the slotted screws (Figure 5-8).
with the appropriate slots.
2. Slide the rear panel down and forward, and secure with the two screws
using a Torx T-15 screwdriver.
Chapter 5.7 Options Cover
To remove the options cover, complete the following steps:
1. Remove the rear panel (Section 5.6).
2. Using a Torx T-15 screwdriver, remove three screws from the top of the
options cover (Figure 5-7).
3. Loosen two slotted screws (Figure 5-8).
4. Lift the options cover off of the slotted screws (Figure 5-8).