Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 81
Power Distribution Board, apply tension to cables.
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
4. Carefully release the speaker assembly tabs and remove the speaker assembly from the display inverter board (Figure 5-24). To replace the speaker assembly, reverse the steps in the above illustration. Chapter 5.15 Power Distribution Board To remove the power distribution board, complete the following steps: 1. Remove the keyboard (Section 5.5). 2. Remove the front bezel (Section 5.14). CAUTION When removing or inserting cables with ZIF connectors, do not pull, twist, or apply tension to cables NOTE: The ZIF connectors in this product have mechanical latches that either slide forward and lift up or slide up to open. Be sure the latches on the ZIF connectors are opened before attempting to remove the cable. 3. Carefully disconnect the power distribution cable from the ZIF connector