Compaq Portable 486 Compaq Portable 486c Personal Computer Maintenance and Ser - Page 71
Base Panel, IMPORTANT: The base panel cannot be removed with the cable lock provision
View all Compaq Portable 486 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
8. Disconnect the fan assembly cable (Figure 5-15). 9. Using a Torx T-10 screwdriver, remove the screw securing the internal keyboard connector to the display pan (Figure 5-15). 10. Using a Torx T-15 screwdriver, remove seven screws securing the I/O board (Figure 5-15). To replace the I/O board, reverse the steps in the above illustration. Chapter 5.12 Base Panel To remove the base panel, complete the following steps: IMPORTANT: The base panel cannot be removed with the cable lock provision pulled out. Be sure the cable lock provision is completely pushed in before performing the following steps. 1. Push in the cable lock provision (Figure 5-16).
8. Disconnect the fan assembly cable (Figure 5-15).
9. Using a Torx T-10 screwdriver, remove the screw securing the internal
keyboard connector to the display pan (Figure 5-15).
10. Using a Torx T-15 screwdriver, remove seven screws securing the I/O
board (Figure 5-15).
To replace the I/O board, reverse the steps in the above illustration.
Chapter 5.12 Base Panel
To remove the base panel, complete the following steps:
IMPORTANT: The base panel cannot be removed with the cable lock provision
pulled out. Be sure the cable lock provision is completely pushed in before
performing the following steps.
1. Push in the cable lock provision (Figure 5-16).