Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 100
-MB Diskette Drive, Remove the T-15 torx screw securing the removable media tray to
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
3-25 4. Remove the 1.44-MB diskette drive (floppy drive) to access the screw which secures the removable media tray. See the "Replacing the 1.44-MB Diskette Drive" procedure above for details. 5. Remove the screw that secures the CD-ROM tray assembly to the chassis. Slide the CD-ROM tray forward out of the server. The CD-ROM tray and the CD-ROM drive adapter board disconnect. CD-ROM cabling remains attached to the CD-ROM adapter board. 6. Remove the T-15 torx screw securing the removable media tray to the chassis and slide the tray out of the server. Figure 3-26. Removing the removable media tray from the server 7. Configure the SCSI ID of the drive as shown with your options instructions. 8. Attach the 3.5-inch drive to the 5.25-inch bracket with the screws provided with your option. Compaq ProLiant 1850R Setup and Installation Guide