Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 185
LAN Driver Update Procedure For NetWare 3.2, Installing Windows NT 4.0 LAN Drivers
![]() |
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
G-6 Updating LAN Drivers LAN Driver Update Procedure For NetWare 3.2 Follow the normal installation procedure for NetWare 3.2. After installation is complete be sure to add the NSSD 3.22A LAN and support drivers from your SmartStart and Support Software CD-ROM or the Support diskettes you create to your ProLiant system in order to be able to connect to your network with the embedded NIC. Installing Windows NT 4.0 LAN Drivers The LAN drivers on the Microsoft Windows NT 4.0 CD-ROM do not work with the embedded Network Interface Controller on the Compaq Proliant 1850R server. Follow the procedure below to install the Windows NT 4.0 drivers. For Windows NT 4.0 (NTSSD) version 2.08 diskettes CAUTION: You must use drivers from either the Compaq Support Software for Microsoft Windows NT 4.0 Products (NTSSD) version 2.08 or from the Compaq website when updating your Compaq LAN drivers. Have these drivers available before you begin your install. Compaq Support Software For Microsoft Windows NT 4.0 Products (NTSSD) version 2.08 can be found on the SmartStart and Support Software version 4.1 CD-ROM. The NTSSD diskettes must be built from the SmartStart 4.1 CD-ROM. Follow the procedure in the SmartStart installation manual to create the NTSSD diskettes using the Compaq Systems Utilities option. You can also download SoftPaq SP6763.EXE from the Compaq website www.compaq.com to create the Compaq Support Software for Microsoft Windows NT 4.0 (NTSSD) version 2.08 diskettes.
![](/manual_guide/products/compaq-1850r-compaq-proliant-1850r-setup-installation-guide-b572d10/185.png)