Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 188
The BANYAN Server Configuration screen comes up., The Add/Change Card screen is
![]() |
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 188 highlights
G-9 3. Insert the LAT SSD installation diskette and press Enter. The following message is displayed if the Vines server version is less 6.40(0): "NOTE: Compaq Netelligent 4/16 TR UTP/STP controller driver is supported only on VINES 6.40(0) and above. Upgrade your system to VINES 6.40(0)or above to install this driver." 4. Installation of LAT SSD continues and following message is displayed: "Kernel should be rebuilt now to add NetFlex-3 Supplement driver. The NetFlex-3 driver will not work without this. Do you want to build the Kernel now - Y/N (default Y) :" NOTE: The rebuilding of the Kernel can be skipped if the user does not wish to Install the NetFlex-3 driver. 5. Press Y or Enter to rebuild the Kernel or press N to skip Kernel rebuilding process. The Install/Remove driver menu is displayed after the completion of this step. 6. Select INSTALL a driver and press Return. From the driver list displayed, select the driver you want to install and press Return. Save the configuration and exit. The following message is displayed: "The additional drivers are now being installed. Please wait ..." 7. The BANYAN Server Configuration screen comes up. Select Add Cards/Change Card Configuration. The Add/Change Card screen is displayed. 8. Select Add a card. From the list of controllers displayed. 9. Select the Compaq Network Adapter which exists on your system. 10. Change the Slot Number to match the slot that the controller occupies, or for an integrated controller specify any slot number that does not contain a network controller. Compaq ProLiant 1850R Setup and Installation Guide
![](/manual_guide/products/compaq-1850r-compaq-proliant-1850r-setup-installation-guide-b572d10/188.png)