Compaq ProLiant 1850R Compaq ProLiant 1850R Setup and Installation Guide - Page 82
Installing a Processor Power Module
View all Compaq ProLiant 1850R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
3-7 Installing a Processor Power Module Every processor supplied by Compaq comes with a Processor Power Module (DC-to-DC converter). Each Processor Power Module (PPM) must be installed in the slot adjacent to its processor to provide power to that processor. If the processor is installed in slot 1, install the PPM in slot 1, if the processor is installed in slot 2 install the PPM in slot 2. The Processor Power Module is keyed to ensure correct alignment. A notch in the bottom edge of the module, near the center, must align with a tab in the mounting bracket. The notch and tab will not line up if the module is turned the wrong way. WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system components to cool before touching. 1. Align the key slot in the bottom edge of the Processor Power Module with the tab in the expansion slot. The module will not seat if turned the wrong way. 2. Open latches (optional) , insert the module straight into a socket on the System Board . 2 1 3 Figure 3-6. Installing a processor power module 3. As the module goes into the socket, the socket latches spread open. Compaq ProLiant 1850R Setup and Installation Guide